Bentayga

706 service bulletins filed with NHTSA for this model year

• May 29, 2026SUSPENSION2082002/1

  B200FFE - Internal Malfunction Logged in Sway Stablization Control Units (00D4/00D5). Customer statement / workshop findings: During fault finding, the following may be observed: DTC B200FFE (Internal Malfunction) stored in the following diagnostic address: • Front Sway Stablization Control Unit (00D4)Or • Rear Sway Stablization Control Unit (00D5)

• May 29, 2026ELECTRICAL SYSTEM2081882/1

  Navigation Map Update Process - MIB2 Infotainment Systems. Customer statement / workshop findings: The customer requests improved and/or newer navigation functionality, including access to the latest navigation maps and updated map content.

• May 21, 2026ENGINE2075140/3

  Engine cooling system over cooling - One or a combination of DTC's may be evident P218100 - P1BB400.

• May 19, 2026SERVICE BRAKES2075034/4

  EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. Customer statement / workshop findings: One or a combination of the following is evident within the DIP (Figure 1) • Electronic parking brake warning And/or • Drivers door power latch intermittent operation warning

• May 18, 2026VISIBILITY/WIPER2078190/6

  AC System not Cooling - HVAC Leakage. Customer Statement: The customer may find that the A/C system not blowing cold air and / or Cooling performance has declined over time.

• May 13, 2026ENGINE2081947/1

  W12 Engine - DTC P192400 control module pin code implausible signal logged in 0001 /0011. Customer Statement: The customer may report one or more of the following after vehicle repairs: • Engine does not start following workshop work • Drive System Fault warning displayed in the instrument cluster (Kombi).

• May 13, 2026STRUCTURE:BODY2078038/3

  Service info: Paint Damage/Anomalies | All Models Customer statement / workshop findings: In rare instances the customer and/or retailer may identify visual damage/anomalies in the paint finish during or post pre-delivery inspection. These may include: • Uneven sheen or texture • Patchy or blotchy appearance • Inconsistent under lighting • Staining, discolouration, or surface blemishes

• May 8, 2026ELECTRICAL SYSTEM2063729/5

  Fitment of control modules from donor vehicles for test purposes. Technical background If an issue is suspected for one of the control modules listed below: • Onboard supply control unit (J519) • Convenience system central control unit (J393) • Data bus diagnostics interface (J533) • Control unit 1 for Information Electronics (J794) • Control unit in dash panel insert (J285) • Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only poss

• and 698 more

Source: NHTSA manufacturer communications (technical service bulletins).