John Cooper Works Convertible

25 service bulletins filed with NHTSA for this model year

• Nov 1, 2018POWER TRAINM230108

  "MANUAL TRANSMISSION - STIFF DIAGONAL GEARSHIFT LEVER MOVEMENT. The customer may complain of a ""stiff diagonal shift"" (e.g., N-R, R-N, 2-3/3-2 or 4-5/5-4). Also, in some cases, gears cannot be selected, or the selector gear does not go into the neutral position. CAUSE 1. The deflection lever circlip of the gearshift mechanism is damaged or missing. 2. Possible corrosion at the gearshift mechanism (shift cables or transmission gearshift unit)"

• Dec 1, 2015ENGINEM110815

  Surface Cracks on the Water Pump Drive Pulley. During a repair, service or inspection, the drive pulley on the water pump shows signs of cracking. No part replacement is necessary unless there is another issue found that will be corrected by replacing the drive pulley.

• Dec 1, 2015ELECTRICAL SYSTEMM090115

  New programming feature: Exclusion of Infotainment Control Units from Programming.

• Aug 1, 2015ELECTRICAL SYSTEMM610515

  CAS Module Fails Programming with CoAPI Error 2082. During vehicle programming, the CAS (Car Access System) module fails to program with CoAPI error 2082 displayed. Refer to the attachment, which lists the affected CAS serial numbers. The following part numbers are affected: 61 35 9 287 534 61 35 9 226 238 61 35 9 227 053 61 35 9 287 535

• Apr 1, 2015ELECTRICAL SYSTEMM620115

  Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM (footwell module) door lock status due to voltage variations

• Apr 1, 2015SERVICE BRAKESM340313

  Brake Fluid Maintenance Service: 36-Month Interval. The CBS displays the first brake fluid service as a 36-month interval from the date of production, instead of the appropriate 24-month interval. Only vehicles within the specified production range can be serviced and covered by this bulletin. For vehicles outside of the production range specified in this bulletin, refer to the CBS and/or Key Read information for the brake fluid service.

• Jan 1, 2014FUEL SYSTEM, GASOLINEM130114

  "N14 and N18 Engine: High-pressure Pump Repair Instruction. INFORMATION The current version of ISTA/D Repair Instruction 13 51 017, ""Removing and installing or replacing high-pressure pump (N14, N18)"" has a procedure error. The current version of the Repair Instruction states to replace the high-pressure supply hose on the N14 engine. The Repair Instruction also states not to replace the high-pressure supply hose on the N18 engine. The N18 portion of the Repair Instruction is incorrect. As an

• Nov 1, 2013STRUCTUREM540513

  "Service Action: Convertible Top Does Not Close. During the closing process, it is possible that the convertible top locating pin on the right side is not correctly positioned in the landing plate at the top of the A-pillar (passenger's side). AFFECTED VEHICLES This Service Action affects certain R57 vehicles produced from July 2013 to October 2013. 3.This picture shows the left side locating pin correctly positioned in the landing plate on the driver's side A-pillar. 4.The passenger's side shou

• and 17 more

Source: NHTSA manufacturer communications (technical service bulletins).