Wagoneer S AWD (Falken tire)

189 service bulletins filed with NHTSA for this model year

• May 29, 2026ELECTRICAL SYSTEMS2623000035 REV.A

  Door Will Not Close. E-Latch Inoperative.

• May 22, 2026SUSPENSION02-001-26 REV. A

  Front Suspension Rattle **Customers may comment on one or more of the following: ● Buzz, squeak or rattle can be heard from both sides of the front suspension. ● Rattling noise coming from the top strut mount.** **This bulletin involves replacing the front strut top mounts.**

• May 18, 2026STRUCTURE:BODYS2623000035

  Door Will Not Close. E-Latch Inoperative.

• May 16, 2026POWER TRAINS2508000050 REV.D

  Upon Start-Up Vehicle Would Not Go into Gear, Vehicle Does not Shut Off, Turtle Lamp on, Wrench Icon on or Reduced Power

• May 14, 2026ELECTRICAL SYSTEM9100786 Rev 1

  TBM2.0H Setting U0080-00. Do not replace TBM ECU or SGW. If replacement is determined, Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only. Under certain conditions, SGW Module may take longer to establish Ethernet communication after boot up. If it takes longer than 30 seconds, The TBM2.0H module will set DTC U0080 - Ethernet Bus 1. As soon as SGW responds, the

• May 13, 2026ELECTRICAL SYSTEM08-208-26 REV. A

  Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.

• May 7, 2026ELECTRICAL SYSTEM111702

  SWITCH - LIFTGATE

• May 7, 2026ELECTRICAL SYSTEM08-208-26

  Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle

• and 181 more

Source: NHTSA manufacturer communications (technical service bulletins).