Maverick FWD

78 service bulletins filed with NHTSA for this model year

• May 21, 2026FUEL/PROPULSION SYSTEMSSM 54857

  2020-2026 Explorer/Escape/Corsair, 2021-2026 Bronco Sport/Bronco, 2022-2026 Maverick, 2024-2026 Mustang/Ranger/Nautilus vehicles equipped with a 2.0L or 2.3L EcoBoost engine may require removal of the turbocharger wastegate control actuator linkage for various reasons. The Workshop Manual (WSM), Section 303-04 Fuel Charging and Controls - Turbocharger - 2.0L/2.3L EcoBoost > Removal and Installation > Wastegate Control Actuator Linkage service procedure been added. In addition, the wastegate actu

• May 9, 2026ENGINE25B51

  Certain 2021-2024 Model Year Bronco, 2021-2024 Model Year Bronco Sport, 2020-2022 Model Year Corsair and Escape, 2016-2024 Model Year Explorer, 2019-2020 Model Year Fusion, 2016-2018 Model Year Focus RS, 2022-2024 Model Year Maverick, 2016-2019 Model Year MKC and 2019-2024 Model Year Ranger Vehicles Equipped with a 2.0L or 2.3L Engine and Engine Block Heater System Block Heater Replacement

• May 4, 2026POWER TRAINSSM 54797

  Some 2020-2026 Corsair/Escape, 2021-2026 Bronco Sport, and 2022-2026 Maverick vehicles equipped with an 8F35 transmission may exhibit a shudder condition, most noticeable at speeds below 60 mph (100 km/h), with no relevant diagnostic trouble codes (DTC) stored in the powertrain control module (PCM). Sometimes, this may be perceived/felt as an engine misfire. This may be due to the torque converter. If Pinpoint Test K: Torque Converter Clutch Operation in Workshop Manual (WSM), Section 307-01 > D

• Apr 28, 2026FUEL/PROPULSION SYSTEMSSM 54785

  Some 2022-2024 Maverick hybrid vehicles may exhibit various electrical symptoms and/or a no crank/no start condition related to an intermittent 12V battery drain that has discharged the 12V battery. This may be due to the software in the anti-lock brake system (ABS) module. To correct this condition, download and run the "ABS - Anti-lock Brake System (ABS) Module Software Update" and "ACCM - Air Conditioning Control Module (ACCM) Software Update" applications using the latest software level of t

• Apr 26, 2026POWER TRAINTSB 26-2194

  This bulletin supersedes 25-2627. Reason for update: To add a Step to reprogram the all-wheel drive (AWD) module for Bronco Sport vehicles. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions:  Shudder chatter condition, most noticeable at low speeds turning  No relevant diagnostic trouble codes (DTCs) present This may be due to internal rear drive unit (RDU) fluid contamination.

• Apr 23, 2026EXTERIOR LIGHTINGSSM 54769

  Bronco Sport and Maverick vehicles utilize an advanced headlamp design that features a sharp horizontal light-to-dark transition. This is an intentional optical characteristic designed to meet safety and performance standards. This transition is a normal attribute of the vehicles lighting signature and is most visible during high-beam operation. No repair is required as the system is functioning to specification. Workshop Manual (WSM), Section 417-01 Exterior Lighting > Description and Operatio

• Apr 15, 2026FUEL/PROPULSION SYSTEMSSM 54746

  Some 2022-2024 Maverick hybrid vehicles may exhibit a no crank/no start condition with a discharged battery due to a 12V battery drain. This may be due to the software in the air conditioning control module (ACCM). To correct the condition, perform a battery condition test as outlined in Workshop Manual (WSM), Section 414-01 Battery > Mounting and Cables > Diagnosis and Testing > Pinpoint Test A. Download and run the "ACCM - Air Conditioning Control Module (ACCM) Software Update" application in

• Mar 9, 2026UNKNOWN OR OTHERTSB 26-2092

  This article supersedes TSB 25-2466 to add Bronco Sport, Escape, Maverick and Corsair, as well as removing Expedition and Navigator. One time use parts for Corsair and Bronco Sport were also added to the parts list. Some of the vehicles listed in the Model statement above may exhibit a headliner rattle or sagging condition around the roof opening panel. This may be due to the adhesive separating from the headliner substrate.

• and 70 more

Source: NHTSA manufacturer communications (technical service bulletins).