Grand Cherokee 2WD

690 service bulletins filed with NHTSA for this model year

• May 29, 2026ELECTRICAL SYSTEMS1623000028 REV.I

  Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.

• May 26, 2026SUSPENSION9100811Rev3

  ***68375577A$ is not showing the correct verbiage please update and correct*** Clunking when going over bumps, potholes, or turns. During diagnosis dealers may find rubber separating from the bushing on the handling link (SOL S2102000004 Rev C. for reference). This is normal and most likely is not attributed to the noise. Please follow normal diagnosis and ensure all tie-rod and ball joints are properly torqued and if worn, replace. If diagnosis leads to lower control arm replacement, the tensio

• May 26, 2026STRUCTURE:BODY112198

  MODULE - LIFTGATE

• May 22, 2026STRUCTURE:BODY23-019-26

  Hot Cup Holders Customers may comment on the following: ● When the rear heat temperature is set at or near max hot output, the front center console's surfaces, first row and second row cup holders and storage bins are getting warm to the touch. This bulletin involves removing the front center console and installing an insulator foam pad on top of the Center Console air duct.

• May 21, 2026ELECTRICAL SYSTEM08-221-26

  R1H Radio U41.10 USB Software Update Customers may experience one or more of the following: ● **FCW OFF light ON with no DTCs and can't turn off. ● Blank screen and then reboot every 2 minutes and 40 seconds. (Rearview Camera (RVC) Functions Normally). ● Paddle shifters not working/No longer a setting. ● Autolocks not working. ● Auto headlights not working. ● AM station not working (Appears some of the vehicles PROXI defaults to "1" which is absent for AM). ● Album Art flickering issue. ● Blank

• May 20, 2026ELECTRICAL SYSTEM112199

  MODULE - LIFTGATE

• May 18, 2026SUSPENSION9100811 REV1

  Clunking when going over bumps, potholes, or turns. During diagnosis dealers may find rubber separating from the bushing on the handling link (SOL S2102000004 Rev C. for reference). This is normal and most likely is not attributed to the noise. Please follow normal diagnosis and ensure all tie-rod and ball joints are properly torqued and if worn, replace. If diagnosis leads to lower control arm replacement, the tension link(s) should be replaced first then test driven to ensure noise has disappe

• May 16, 2026ELECTRICAL SYSTEM08-217-26

  Heads Up Display (HUD) Resets to Default Settings Each Ignition Cycle Customers may experience the following: ● The custom HUD configurations do not save after a vehicle sleep cycle. HUD configuration will reset to the default settings.

• and 682 more

Source: NHTSA manufacturer communications (technical service bulletins).