C-HR

98 service bulletins filed with NHTSA for this model year

• Jan 30, 2026ELECTRICAL SYSTEMT-SB-0106-22 Rev2

  OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.

• Jan 28, 2026ELECTRICAL SYSTEMT-SB-0001-26

  Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.

• Jan 7, 2026UNKNOWN OR OTHERT-SB-0055-24 Rev2

  Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual a

• Jul 9, 2025ELECTRICAL SYSTEMZKH

  All VINs under ZKH are expired as of July 6, 2025 Toyota has received reports stating that the door mirror foot lights (puddle lights) may project a distorted image of the C-HR logo onto the ground. This distortion may be due to the projector film in the door mirror foot light becoming damaged due to heat and moisture. Although the door mirror foot light is covered by Toyota’s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers

• Jul 9, 2025ELECTRICAL SYSTEMT-SB-0075-19

  All VINs under ZKH are expired as of July 6, 2025 Some 2018 – 2019 model year C-HR vehicles may exhibit a condition where the door mirror foot light projects a distorted image of the C-HR logo onto the ground.

• Apr 2, 2025ELECTRICAL SYSTEMT-TT-0780-25

  To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

• Dec 6, 2024STRUCTURE:BODYT-SB-0039-24 Rev2

  The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the

• Dec 6, 2024STRUCTURE:BODYT-SB-0038-24 Rev2

  To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

• and 90 more

Source: NHTSA manufacturer communications (technical service bulletins).