QX60 FWD

11 service bulletins filed with NHTSA for this model year

• May 1, 2026SERVICE BRAKESITB26-005

  AEB WARNING WITH ONE OR MORE CURRENT DTCS STORED IN THE ADAS CONTROL UNIT 2, AND/OR THE LASER/RADAR CONTROL UNIT IF YOU CONFIRM The front radar is inoperative, the AEB warning is displayed, and one or more of the following DTCs are stored as CURRENT: · U2752-88 for “Ethernet circuit” stored in the ADAS control unit 2, · U275F-88 for “Ethernet circuit” stored in the LASER/RADAR (DISTANCE SENSOR) control unit, OR · C2589-86 for “TCM” stored in the LASER/RADAR (DISTANCE SENSOR) control unit, AND/OR

• May 1, 2026FUEL/PROPULSION SYSTEMITB26-002A

  FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of ITB26-002.

• Apr 13, 2026STRUCTURE:BODYITB09-063C

  CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is

• Mar 31, 2026STRUCTURE:BODYITB26-004

  FRONT FASCIA POPPING OUT NEAR HEADLAMP IF YOU CONFIRM The Front Bumper Fascia is detaching from the fender under the headlamp on one/or both sides. ACTION Refer to the SERVICE PROCEDURE in this bulletin to: 1. Remove the Front Bumper Fascia. 2. Replace the affected Headlamp Bracket. 3. Replace the affected Front Bumper Fascia Side Bracket. 4. Reinstall the Front Bumper Fascia, with Betaseal (or equivalent) adhesive between the Front Bumper Fascia and the affected side Front Bumper Fascia Side Br

• Feb 2, 2026FUEL/PROPULSION SYSTEMITB26-002

  FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five (5) times. 3. Re-check the fuel filler tube lower seal with a smoke machine to d

• Jan 22, 2026STRUCTURE:BODYITB26-001

  METAL TICKING NOISE AT B-PILLAR IF YOU CONFIRM A metallic ticking noise is coming from the driver (LH) side and/or passenger (RH) side B-Pillar when driving the vehicle on various road surfaces. ACTION Refer to the SERVICE INFORMATION in this bulletin to adjust the inner support of the affected B-Pillar. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is e

• Jan 7, 2026FUEL/PROPULSION SYSTEMITB25-014

  VENT CONTROL VALVE IN ACTIVE TEST INOPERATIVE IN CONSULT 4 SERVICE INFORMATION An issue in CONSULT 4 has been identified in “EVAP system close” in Work support. · After selecting the "EVAP system close" in Work support, the “VENT CONTROL/V” in Active test becomes non-functional temporarily. · When selecting “EVAP system close” operation in Work support, wait 10 minutes before starting “VENT CONTROL/V” Active test or cycle the IGN switch ON/OFF for “VENT CONTROL/V” Active test to be operational.

• Oct 16, 2025ELECTRICAL SYSTEMITB25-007A

  SPEAKERS EXHIBIT INTERMITTENT BOOMING, HEAVY BASS OR RATTLING WHEN ENGINE RPM CHANGES IF YOU CONFIRM The client complains of the speakers exhibiting an intermittent booming, heavy bass, or rattling when the engine RPM changes. ACTION Refer to the SERVICE PROCEDURE below to: 1. Ensure the ANC SETTING is turned ON. 2. Reprogram the Audio Amplifier, if applicable.

• and 3 more

Source: NHTSA manufacturer communications (technical service bulletins).